Interface Module

The Magstim Stimulator Interface Module provides additional interface functionality for all of the 2nd generation Magstim Stimulators (200², BiStim² and Rapid²). This compatibility is achieved through the universal External Interface Port on the rear panel of all the stimulators.

In addition to allowing users to select either the BNC or D-type connection, the parameters outlined in the specification section below can be quickly selected using the array of DIP switches.

Unlike most other Rapid² interface solutions, this Module will allow the Rapid² UI to be connected together with other equipment such as EMG, which will give the option of easily triggering externally while maintaining the functionality of the UI.  This connector also provides the facility to interface with external control software, enabling the user to adjust all desired parameters.

Specification

Parameter

Options

Trigger out polarity

Positive (+), Negative (-)

Trigger out type

Pulse per pulse, Pulse per train

Trigger out width

100µs, 8ms, 18ms, 28ms, 38ms, 48ms, 58ms, 68ms, 78ms

Trigger in polarity

Positive (+), Negative (-)

Trigger in type

Edge, Level